How To Store Chainsaw Without Oil Leaking

A chainsaw is a versatile tool that can be used for many different tasks. Whether you are cutting down trees, clearing brush, or just need to trim some hedges, this power tool will get the job done. However, some precautions should be taken when storing your chainsaw to avoid leaking oil and damaging floors or other surfaces. Here’s how to store chainsaw without oil leaking.

Solution Of How to Store Chainsaw Without Oil leaking

A chainsaw is a very important tool for any homeowner to have. However, it’s not uncommon for these power tools to leak oil while they are being stored in the garage or shed. Here I have discussed some of the reasons why your saw might start leaking oil and some steps that you can take to fix this problem.

How To Store Chainsaw Without Oil Leaking

If you want to store your chainsaw in a safe and sound manner, the key is preventing leaks. To do this best, drain out all of the bar oil and fuel mix from it before storing – that way, there’s nothing for any potential leak to drip on!

But, If you need to keep oil in the tank, you should lay the chainsaw on its side with the cap open. This will reduce air pressure to build when it is cold or hot. Make sure you remember to close it before using it again.

Why chainsaw oil leak in storage?

When oil is pumped into the guide bar, a vacuum can happen due to air being sucked in. This makes it difficult for more oil to enter, and if there isn’t good ventilation, things could get messy! Make sure you ventilate your chainsaw’s tank so that air can come in and make room for even more oils.

In some conditions, the oil may come out of the tank while your chainsaw is in storage. For example, this can happen when there are changes in air pressure throughout the day and night because of changes in temperature.

When the temperature changes, there may be oil in your chainsaw. It can leak out of the tank when you are not using it. This happens because there is more pressure in the air when it is hotter and less pressure when it is colder.

When the temperature drops at night, the air and oil in the tank shrink. The air is drawn into the tank from outside to fill up that space. As it warms up during the day, both air and oil expand again. If it does not equalize, then pressure builds up. To equalize this pressure, a small amount of oil is needed to be forced out through the “oil ports.”

It is usual to see oil leaks in chainsaws after a period of usage. But if the oil leaking is severe and the chainsaw is not yet used for a long period, we have to figure out what caused it.

One common reason for my Stihl chainsaw is the tool-less oil cap. Unfortunately, I heard the same problem from many other chainsaw owners. It is a very frustrating problem because it prevents you from maintaining your machine until the leak has been fixed.

How to find from where the oil is leaking?

Pour oil in your chainsaw and Put clean cardboard underneath your chainsaw. Then leave as it is for some time and check afterward. The oil will be in the cardboard, so you will know where it is coming from. Most of the time, the oil leaked from the side of the oil cap. If you don’t find any leak, then tilt the chainsaw and leave it for some time as before.

How to fix stihl chainsaw leaking bar oil and other chainsaws:

Nowadays, most new Stihl chainsaws come with a toolless oil cap. This is convenient for beginners, especially those who don’t use the chainsaw on a regular basis. But if you are a regular heavy user, you may find problems with this cap. After using the chainsaw for some time, the cap can stop working and not be able to work properly anymore.

So you have to make sure that the oil cap is working correctly to prevent oil leaking. If not, then you will need to replace or repair the oil cap.

To ensure the oil cap is working properly, always clean the area where the cap sits before putting it on and after taking off. Also, check the O-ring for damage or wear. If the O-ring is damaged, replace it with a new one before putting on the cap again to avoid oil leakage.

The Husqvarna also using the toolless oil cap, and I find their one way better than the Stihl’s. In addition, I never experience any oil leakage from the oil cap. In our review of the best chainsaw under 300 dollars we have mentioned few chainsaw’s which are worth for money. And at the time of our testing I can remember few of them are passed on oil leaking test.

Stihl Leaking bar oil Solution For MS170, MS180, MS210, MS23, MS250 and Others

If you are using a smaller version of a Stihl chainsaw such as MS170, MS180, MS210, MS230, MS250, and so on, you If you are using a smaller version of a Stihl chainsaw such as MS170, MS180, MS210, MS230, MS250, and so on, you are probably facing a common oil leaking issue. And probably searching for the solution of fixing Stihl ms170 leaking bar oil or fixing Stihl ms250 leaking bar oil on the internet. So here is the solution of how to fix them.

See closely In between where the bar and chain are located. More precisely, just right near the bottom of the muffler. If that’s full of dust and debris, blast them out with your air compressor.

Now, see right near the bottom of the muffler; if you can see a wide, open hole (not an orange plastic pug), then there are chances of oil leaking from that hole.

To repair this issue, take an 8-millimeter socket and open the muffler nuts. And pull the muffler off. Once you open the muffler, you can see an orange plug that’s the main culprit of leaking oil.

Now Order a little stihl set screw which part number is 0000-953-1001. With a 3-millimeter hex wrench Allen key, you will need to fit the screw set in the orange hole and tighten it down with your wrench but not too tight or flush to the surface.

Now reassemble the muffler, and you are all set, now the oil leak will be fixed.If the problem still persists, contact your Stihl dealer or repair center

Leave a Comment