This article is all about chainsaw tips for beginners. In this article, I will be talking about the essential guide to chainsaws that every beginner should know before cutting anything.
A chainsaw is an essential tool for those who want to do some DIY projects in their backyard. It helps them cut down trees, trim branches, and clear the rubbish after a storm.
There are many things to consider when using a chainsaw for the first time. It is important to know the type of task you want to undertake, what size saw would be appropriate, and how to start it safely. Although chainsaws are a great tool for cutting down trees and clearing out the land, they can be dangerous if not handled properly.
13 Best Chainsaw Tips For Beginners To Pro
Don’t Go Beyond Your Limits:
One of the most common mistakes people make while using a chainsaw is going beyond their limits. If you are inexperienced, it’s best to start with smaller and less challenging tasks such as trimming branches from trees, clearing small tree limbs.
If you feel uncomfortable or don’t know how to properly use a chainsaw, ask for help. There are professionals who can help you with cutting trees or clearing the land.
Pick The Right Chainsaw According To Your Purpose:
There are many chainsaws out there, and it is important to pick the right one for your needs. It is a good idea to talk to someone from the store before making any purchases if you want some help with picking a saw. You should know what size of the tree you will be cutting, how often you plan to use it, or whether you’ll be cutting a lot of timber.
If you are a beginner, then it is best to go for a smaller saw such as chainsaw under $100 are preferable. Smaller chainsaws are perfect for trimming small tree limbs and clearing the land. In addition, these saws often tend to be lighter, easier to handle, and less expensive than other types of chainsaws.
If you have some expertise on chainsaws and want to have more power than lighter chainsaws, then you can go for gas-powered saws. You can find mediu size chainsaw under $400. These types of chainsaws are heavier and more expensive than smaller ones, but they have the power to cut through the toughest materials.
Before Cutting, Make Sure The Saw Is In Perfect Condition:
It is important to check all the parts and make sure they are in good condition before using your saw for anything else. A few things that you should look at are
- chainsaw bar oil level,
- chain lubrication levels,
- chain tension and
- Teeth are sharp enough.
You should also check for any damages to the saw or anything that could affect its operation. Such as if the bolts were loose or the chain is not aligned properly.
Scan Your Work Area:
Before starting the saw, you should scan your work area and ensure there are no tripping hazards or anything that could be dangerous. For example, if you are working in your garden, make sure there is no kid playing around in the area.
Also, make sure that nothing could fall from the tree or branch you are about to cut down.
Start The Saw Safely:
People who are new to chainsaws often do a drop start. This is when they hold the handle, drop the saw, and pull up on the handle at the same time. It is unsafe, and beginners are not supposed to do this. They can hurt themselves by starting their Chainsaw this way.
The best way to start a chainsaw is as follows:
- Make sure the chain brake is on (locked) before you start the saw. This will stop the saw from going up into your face.
- Put the handle of the saw between your legs.
- Use your left arm to keep it in place and keep a tight grip with your left arm elbow lock so that a kickback can’t hurt you.
- With your right hand, reach across to pull on the pull start just like any other starter rope.
The alternative way to start a chainsaw is as follows:
You can start the saw on the ground too.
- Make sure that it is locked.
- Then put your foot through the handle loop for not to wobble.
- Then hold the saw down with your left hand, pull it up, and start it with your right hand.
One problem with this way is you might hurt your back, You can avoid back pain by putting the chainsaw in a low profile table or bench to start. However, That’s why I recommend starting your Chainsaw by putting the handle between your legs, because in the forest where you find the bench?
Be Aware Of Kickbacks:
Kickbacks are a common danger of the Chainsaw, and they happen when the tip of your blade bounces back from cutting into an object. Kickback can happen in a few different ways.
The first is when the blade starts to cut into an object and then bounces back, causing the Chainsaw to stop.
The second is when your blade hits something in the object and bounces back towards you, which can cause a serious injury.
The third is when the Chainsaw starts to cut into an object and then slips past it, which can cause you to lose control of your saw.
To avoid chainsaw kickback, always make sure the saw is in perfect condition before cutting. Use a sharp chain and check for worn teeth, rusty or loose bolts on the bar, sprocket guard/throttle levers, chain tension that may cause kickback.
Don’t cut above shoulder height without using proper protection – this will reduce the risk of chainsaw accidents.
It is wise, stand to the side of the cutting path of the chain saw. You should not be near the saw when it is running. Know where the bar tip is at all times. To prevent contact with a kickback zone, install a safety tip that covers up that nose part of an attachment on the saw.
Hold The Saw Properly:
When we are using chainsaws, holding them with both hands is recommended. However, never think of holding the saw in one hand while the cutting process is going on. Also, don’t change your position at the time the cutting process is going on.
Anchor your foot firmly in the ground with gaps between two feet. It won’t make you feel insecure while cutting trees with a chainsaw in your hand.
When cutting, hold the Chainsaw close to your body, at about stomach height. Never cut above the shoulder; this will affect the stability of your body and can create serious injury.
Beware Of using Chainsaw on a ladder:
If you are using the Chainsaw on a ladder, always use it with extreme caution. I would suggest you not use a chainsaw on a ladder at all if you are a beginner.
Be alert while cutting:
A chainsaw can be a very dangerous tool if it is not handled with care. It might seem fun to play around on the tree, but pay keen attention when cutting down a tree.
It is also very important to be attentive while cutting. This will prevent you from missing a detail that might cause injury or damage your chainsaw blade and chain in the long run.
Be aware of any falling branches overhead, as well as nearby obstacles like power lines or other people who could get injured by sudden movements on your part. Cutting should be done in a careful and controlled manner.
Chainsaw Cutting Tips For Beginners:
In most cases, people need chainsaws for cutting storm-damaged fallen trees in their yards. It is recommended to use the basic bucking cuts technique.
Many beginners tend to push down on the Chainsaw all the way through with force, but there is a better way to do it.
In every Chainsaw, there is a dog spike. You can use it for leverage when you are cutting the log. Once you get a little way into the log, anchor the dog spikes into the side of the log. This way, the spike is holding the Chainsaw on one side of the log.
Once this is done, use it for leverage by pulling up on the backside of the handle with full throttle. This will give you a smooth cut and will be easier than cutting without using it.
If you want to cut small trees, it is easiest to cut them at a slant. Cut the tree in the direction that you want it to fall.
To clear the stamp:
- Hold down your saw until you are cutting into the dirt.
- Watch out for rocks and soil, too.
- Try to clean up around the tree’s roots before you start cutting.
After you cut, round off the edge of what is left with your saw blade.
Cutting down a tree is not an easy job, and it can be made even more difficult if you try to cut the trunk by pushing your saw from underneath. Applying too much force will make cutting hard for you and cause excessive wear on your chainsaw blade.
You are better off positioning yourself where you have leverage when attempting to cut through a tree. And also, use the dog spikes for better cutting without force.
Maintenance is The Key For Proper Chainsaw Use:
The maintenance of your chainsaw should be done with care to ensure that it will last as long as possible without needing repair work from time to time, or worse yet, being lost due to damage.
Keep the fuel tank full at all times, clean out any loose wood chips from the saw, tighten any loose bolts that might be on your Chainsaw, and keep it well lubricated. Make sure the chain brake and air filter are free from dirt and debris as well.
It is recommended to sharpen your chainsaw blade after a certain amount of use. The best way to tell if the blade is dull is to look at it closely and see where the teeth are. If they are not sharp enough, the logs will be cut unevenly.
Also, store your Chainsaw in a secure place. If you have to carry it around, put the chain on and cover up any exposed metal parts with clothing or tape not to be damaged. If you have an issue with tangle knotted Chainsaw chains, there is a guide about how to unknot chainsaw chains.
Chain Tensioning Tips For Beginners:
It often happens with new chains. After you cut for a while, they will get warm and stretch. You need to make sure that the chain cannot slide out of kerf in the bar. You need to tighten up the chain that much, so it can move freely but not too tight, or it might break or wear out too soon. Once you are done cutting, loosen the chain back up a little bit to avoid tension on your clutch and crankshaft.
Use and Wear Protective gear:
A chainsaw is a powerful tool that can easily cause serious injury if the operator isn’t wearing proper safety gear. Always wear protective gloves, boots, and a full-face helmet with neck protection while you’re using a chainsaw–even when just clearing brush or pruning limbs.
If you are cutting live trees, always use an approved hard hat with a chinstrap. Also, use hearing protection while operating the Chainsaw. This will help prevent hearing loss, which can take years to develop.
Wear protective clothing that is specially made for Chainsaw and other power tool work. These clothes are made from tough materials that will help keep you safe. In addition, they are well ventilated so that you can stay cool in warm weather.
Don’t ignore warning signs, such as a very hot running saw or an unusual vibration pattern to your hands and arms while using the Chainsaw. These can be symptoms of kickback–a sudden reaction when the teeth on two separate pieces of wood are forced together at high speed. Kickbacks can cause serious injury to the operator.
While chainsaws typically don’t have exposed moving parts, it’s wise to wear eye protection as well since chips of wood and small pieces can fly off the saw at high speed. Wear long pants, a shirt that covers your arms and sleeves, or gloves when using the Chainsaw, so you’re not vulnerable to minor cuts.
Safety Tips Of How To Carry The Chainsaw In The Forest, Garden, or the Workspace:
Be sure to lock the chain brake when carrying your Chainsaw. Hold it with its bar behind you and away from your body, so if you are walking around, it will not hurt any of your limbs or clothes. That way, you can keep the hot exhaust or muffler facing away from your body and against your leg.